Xiaomi Mi 2S Stock Firmware Download

Xiaomi Mi 2S Stock Firmware Download

Thank you for visiting SkyFileOS.com. The firmware that SkyFileOS are going to provide is Android Kitkat based firmware Xiaomi Mi 2S Stock Firmware Download). Xiaomi Mi 2S comes with Android Kitkat 4.4.4

About Xiaomi

Xiaomi Corporation is a Chinese electronics company headquartered in Beijing. Xiaomi makes and invests in smartphones, mobile apps, laptops, and related consumer electronics.

Xiaomi Mi 2S Stock Firmware Download
Xiaomi Mi 2S Stock

Xiaomi Mi 2S was launched in 2013, April, The phone CPU powered by Quad-core 1.7 GHz Krait 300, and it comes with 2 GB RAM and 16/32 GB ROM, microSD, Xiaomi Mi 2S comes with the Primary Singel  8MP+ 2 MP selfie camera and powered by Removable Li-Ion 2000 mAh battery..



How to Instaill Xiaomi Mi 2S Fastboot Method

  1. Download the MIUI xxx Fastboot ROM for your Xiaomi devices
  2. Now turn your device off completely. Press the Volume– key and the Power button simultaneously to enter Fastboot mode.
  3. Once you have entered fastboot mode, you will see the Mi Bunny Fastboot mode picture.
  4. Now connect the device to the Windows PC/laptop via a micro USB cable.
  5. You need to double click on the downloaded ROM file to extract it.
  6. Open the extracted ROM folder, and copy its path on the computer.
  7. To install Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash tool on your computer.
  8. Now click on the installer file on your computer and continue the installation. (Ignore the security warning) and select run to continue the installation.
  9. After installation is completed, open MiFlash.exe and paste the address bar from the ROM file folder path copied in the 6th step. (You can also browse the folder by tapping the Select button).
  10. If you have pasted the Address code, Now Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
  11. Your flashing process has started, Now Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.

How to Instaill Xiaomi Mi 2S Recovery Method

  1. First of all, To Install via Recovery, you need to download Recovery ROM
  2. Now connect your Xiaomi device to PC and copy the downloaded file to the downloaded_rom folder in your Internal Storage.
  3. Launch ‘Updater‘ app in your device.
  4. Click on the three dots (‘…’) at the top-right corner, and select the ‘choose update package‘.
    now press OK to start the flashing process.
  5. Done. Your device will reboot after the flashing is done.

The Flash File Full Guide:-

Remember: Supported for Xiaomi Mi 2S.
Charge your phone: Before you proceed, you are recommended to ensure that your device is at least 50% charged.
Laptop or PC: To install the flash file, you need a PC or Laptop.
Take Device Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.

Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)- Xiaomi Mi Flash tool Download
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the below given required files on your PC.

•Warning: The Firmware file is only for the Xiaomi Mi 2SDon’t try this file on any other device, It may brick or damage your device we will not be responsible for that.

•Important Suggestion: If your problem not solved by given solution you can write in comments we will try best to fix as soon as we can.

Read More Post: Xiaomi Redmi Note 3 SE Official Flash File Download Android

Add a Comment

Your email address will not be published. Required fields are marked *