Thank you for visiting SkyFileOS.com. The firmware that SkyFileOS are going to provide is Android 5.0 (Lollipop) based firmware Xiaomi Redmi 2A Stock Firmware Download). Xiaomi Redmi 2A comes with Android 5.0 (Lollipop)
Xiaomi Corporation is a Chinese electronics company headquartered in Beijing. Xiaomi makes and invests in smartphones, mobile apps, laptops, and related consumer electronics.
Xiaomi Redmi 2A was launched in Released 2015, March, The phone CPU powered by Quad-core 1.5 GHz, and it comes with 1 GB RAM and 8 GB ROM, microSD, Xiaomi Redmi 2Acomes with the Primary Singel 8 MP+ 2 MP selfie camera and powered by Removable Li-Ion 2200 mAh battery.
Download the MIUI xxx Fastboot ROM for your Xiaomi devices
Now turn your device off completely. Press the Volume– key and the Power button simultaneously to enter Fastboot mode.
Once you have entered fast boot mode, you will see the Mi Bunny Fastboot mode picture.
Now connect the device to the Windows PC/laptop via a micro USB cable.
You need to double click on the downloaded ROM file to extract it.
Open the extracted ROM folder, and copy its path on the computer.
To install Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash tool on your computer.
Now click on the installer file on your computer and continue the installation. (Ignore the security warning) and select run to continue the installation.
After installation is completed, open MiFlash.exe and paste the address bar from the ROM file folder path copied in the 6th step. (You can also browse the folder by tapping the Select button).
If you have pasted the Address code, Now Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
Your flashing process has started, Now Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
How to Instaill Xiaomi Redmi 2A Recovery Method
First of all, To Install via Recovery, you need to download Recovery ROM
Now connect your Xiaomi device to PC and copy the downloaded file to the downloaded_rom folder in your Internal Storage.
Launch ‘Updater‘ app in your device.
Click on the three dots (‘…’) at the top-right corner, and select the ‘choose update package‘.
now press OK to start the flashing process.
Done. Your device will reboot after the flashing is done.
The Flash File Full Guide:-
Remember: Supported for Xiaomi Redmi 2A. Charge your phone: Before you proceed, you are recommended to ensure that your device is at least 50% charged. Laptop or PC: To install the flash file, you need a PC or Laptop. Take Device Backup: The very first thing to pay attention to is taking the device backup. You might not be able to take the backup of phone data, however, if you have inserted a memory card in your device, remove it at least to save it.