Thank you for visiting SkyFileOS.com. The firmware that SkyFileOS are going to provide is Android 4.4 (KitKat), Android One firmware Asus Fonepad 7 FE171CG Stock Firmware Download). Asus Fonepad 7 FE171CG comes with Android 4.4 (KitKat).
AsusTek Computer Inc is a Taiwanese multinational computer and phone hardware and ….. confidential documents from Microsoft and other organizations, internal Asus documents, and sensitive personal information including CVs…
Asus Fonepad 7 FE171CG was launched in Available. Released 2015, January, The phone CPU powered by Dual-core 1.2 GHz, and it comes to 8/16 GB, 1/2 GB RAM microSD, up to 64 GB, Asus Fonepad 7 FE171CGcomes with the Primary Singel 5 MP+ 2 MP selfie camera and powered by. Non-removable Li-Po 3950 mAh battery (15 Wh).
Asus Fonepad 7 FE171CG First of all Download the zip file from above link and rename the file to update.zip.
Asus Fonepad 7 FE171CG Now Switch Off your device and reboot into recovery mode by pressing Power button +Volume UP button.
Asus Fonepad 7 FE171CG In recovery mode select applies update from sd card.
Asus Fonepad 7 FE171CG Now Choose update.zip file which you downloaded.
Asus Fonepad 7 FE171CG Wait until the installation process completes.
Asus Fonepad 7 FE171CG Once the installation process is completed and You can Reboot your ZenFone Max Pro.
Asus Fonepad 7 FE171CG That’s it, fellas! Done. you have upgraded your smartphone.
If you own Asus Fonepad 7 FE171CG smartphone and you are looking for Asus Fonepad 7 FE171CG Stock ROM Firmware File flash to fix your bricked phone, then you are in the right article/post. We are going to guide on how to download and install the official Asus Fonepad 7 FE171CG Stock ROM on your device. This guide is easy and straightforward to follow. We have listed the Asus Fonepad 7 FE171CG Flash File for all models devicebelow. Download the Asus Fonepad 7 FE171CG Stock Firmware file to fix your device.
How To Install The Flash File Full Guide 2:-
First of all Download the ADB and Fastboot drivers for Windows and Mac and extract it Asus Fonepad 7 FE171CG.
Now move the downloadedOTA zip file to ADB Folder Asus Fonepad 7 FE171CG.
Enable USB Debugging Asus Fonepad 7 FE171CG.
Asus Fonepad 7 FE171CG To Enable USB Debugging, First of all, You need to activate Developer Option on your smartphone.
Asus Fonepad 7 FE171CG To activate, Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled”
Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging.
In your PC/Laptop, Open the extracted ADB Folder and Open Command Window by pressing Shift Key + Right Mouse Click.
Reboot your phone to recovery by pressing Volume UP + Power button.
Now connect the PC to Mobile with USB Cable.
Now enter the following command in the command window that you open
This command will show if any device is connected properly. If it doesn’t show, then please check the drivers are installed properly or if the attached cable is damaged.
If your device is listed, then please type the below command in your command window.
adb sideload File_name.zip
Wait until the installation process completes.
Once the installation process is completed and You can Reboot your Asus Fonepad 7 FE171CG.
•Warning:The Firmware file is only for the Asus Fonepad 7 FE171CG, Don’t try this file on any other device, It may brick or damage your device we will not be responsible for that.
•Important Suggestion: If your problem not solved by the given solution you can write in comments we will try best to fix as soon as we can.