Thank you for visiting SkyFileOS.com. The firmware that SkyFileOS are going to provide is Android 5.1.1 (Lollipop), Android One firmware Asus Pegasus 2 Plus Stock Firmware Download). Asus Pegasus 2 Plus comes with Android 5.1.1 (Lollipop).
AsusTek Computer Inc is a Taiwanese multinational computer and phone hardware and ….. confidential documents from Microsoft and other organizations, internal Asus documents, and sensitive personal information including CVs…
Asus Pegasus 2 Plus was launched in Available. Released 2015, December, The phone CPU powered by Octa-core (4×1.7 GHz Cortex-A53 & 4×1.0 GHz Cortex-A53), and it comes 32 GB, 3 GB RAM microSD, up to 32 GB, Asus Pegasus 2 Pluscomes with the Primary Singel 13 MP+ 8 MP selfie camera and powered by. Non-removable Li-Po 3030 mAh battery.
Asus Pegasus 2 Plus First of all Download the zip file from above link and rename the file to update.zip.
Asus Pegasus 2 Plus Now Switch Off your device and reboot into recovery mode by pressing Power button +Volume UP button.
Asus Pegasus 2 Plus In recovery mode select applies update from sd card.
Asus Pegasus 2 Plus Now Choose update.zip file which you downloaded.
Asus Pegasus 2 Plus Wait until the installation process completes.
Asus Pegasus 2 Plus Once the installation process is completed and You can Reboot your ZenFone Max Pro.
Asus Pegasus 2 Plus That’s it, fellas! Done. you have upgraded your smartphone.
If you own Asus Pegasus 2 Plus smartphone and you are looking for Asus Pegasus 2 Plus Stock ROM Firmware File flash to fix your bricked phone, then you are in the right article/post. We are going to guide on how to download and install the official Asus Pegasus 2 Plus Stock ROM on your device. This guide is easy and straightforward to follow. We have listed the Asus Pegasus 2 Plus Flash File for all models devicebelow. Download the Asus Pegasus 2 Plus Stock Firmware file to fix your device.
How To Install The Flash File Full Guide 2:-
First of all Download the ADB and Fastboot drivers for Windows and Mac and extract it Asus Pegasus 2 Plus.
Now move the downloadedOTA zip file to ADB Folder Asus Pegasus 2 Plus.
Enable USB Debugging Asus Pegasus 2 Plus.
Asus Pegasus 2 Plus To Enable USB Debugging, First of all, You need to activate Developer Option on your smartphone.
Asus Pegasus 2 Plus To activate, Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message “Developer option enabled”
Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging.
In your PC/Laptop, Open the extracted ADB Folder and Open Command Window by pressing Shift Key + Right Mouse Click.
Reboot your phone to recovery by pressing Volume UP + Power button.
Now connect the PC to Mobile with USB Cable.
Now enter the following command in the command window that you open
This command will show if any device is connected properly. If it doesn’t show, then please check the drivers are installed properly or if the attached cable is damaged.
If your device is listed, then please type the below command in your command window.
adb sideload File_name.zip
Wait until the installation process completes.
Once the installation process is completed and You can Reboot your Asus Pegasus 2 Plus.
•Warning:The Firmware file is only for the Asus Pegasus 2 Plus, Don’t try this file on any other device, It may brick or damage your device we will not be responsible for that.
•Important Suggestion: If your problem not solved by the given solution you can write in comments we will try best to fix as soon as we can.