Asus Pegasus X003 Stock Firmware Download

Asus Pegasus X003 Stock Firmware Download

Thank you for visiting SkyFileOS.com. The firmware that SkyFileOS are going to provide is Android 4.4 (KitKat), Android One firmware Asus Pegasus X003 Stock Firmware Download). Asus Pegasus X003 comes with Android 4.4 (KitKat).

AsusTek Computer Inc is a Taiwanese multinational computer and phone hardware and ….. confidential documents from Microsoft and other organizations, internal Asus documents, and sensitive personal information including CVs…

Asus Pegasus X003 Stock Firmware Download
Asus Pegasus X003

Asus Pegasus X003 was launched in Available. Released 2015, January, The phone CPU powered by ARM Cortex-A53, 1200 MHz, and it comes to Storage: 16 GB, 2 GB, 533 MHz microSD, up to 64 GB, Asus Pegasus X003 comes with the Primary Singel  3264 x 2448 pixels, 1920 x 1080 pixels, 30 fps selfie camera and powered by. 2500 mAh, Li-Polymer

Download Link here | Asus Pegasus X003

How To Install The Flash File Full Guide:-

  • Asus Pegasus X003 First of all Download the zip file from above link and rename the file to update.zip.
  • Asus Pegasus X003 Now Switch Off your device and reboot into recovery mode by pressing Power button +Volume UP button.
  • Asus Pegasus X003 In recovery mode select applies update from sd card.
  • Asus Pegasus X003 Now Choose the update.zip file which you downloaded.
  • Asus Pegasus X003 Wait until the installation process completes.
  • Asus Pegasus X003 Once the installation process is completed and You can Reboot your ZenFone Max Pro.
  • Asus Pegasus X003 That’s it, fellas! Done. you have upgraded your smartphone.

If you own Asus Pegasus X003 smartphone and you are looking for Asus Pegasus X003 Stock ROM Firmware File flash to fix your bricked phone, then you are in the right article/post. We are going to guide on how to download and install the official Asus Pegasus X003 Stock ROM on your device. This guide is easy and straightforward to follow. We have listed the Asus Pegasus X003 Flash File for all models device below. Download the Asus Pegasus X003 Stock Firmware file to fix your device.

How To Install The Flash File Full Guide 2:-

  1. First of all Download the ADB and Fastboot drivers for Windows and Mac and extract it Asus Pegasus X003.
  2. Now move the downloaded OTA zip file to ADB Folder Asus Pegasus X003.
  3. Enable USB Debugging Asus Pegasus X003.
  4. Asus Pegasus X003 To Enable USB Debugging, First of all, You need to activate Developer Option on your smartphone.
  5. Asus Pegasus X003 To activate, Go to your Settings -> About Phone -> Now Tap on the Build Number 7-8 Times until you see a toast message Developer option enabled”
  6. Once your developer option is active, Go back to your settings -> Open developer option -> Enable USB Debugging.
  7. In your PC/Laptop, Open the extracted ADB Folder and Open Command Window by pressing Shift Key + Right Mouse Click.
  8. Reboot your phone to recovery by pressing Volume UP + Power button.
  9. Now connect the PC to Mobile with USB Cable.
  10. Now enter the following command in the command window that you open
    adb devices
  11. This command will show if any device is connected properly. If it doesn’t show, then please check the drivers are installed properly or if the attached cable is damaged.
  12. If your device is listed, then please type the below command in your command window.
    adb sideload File_name.zip
  13. Wait until the installation process completes.
  14. Once the installation process is completed and You can Reboot your Asus Pegasus X003.
•Warning: The Firmware file is only for the Asus Pegasus X003Don’t try this file on any other device, It may brick or damage your device we will not be responsible for that.

•Important Suggestion: If your problem not solved by the given solution you can write in comments we will try best to fix as soon as we can.

Read More: Xiaomi Redmi Note 2 Stock Firmware Download

Add a Comment

Your email address will not be published. Required fields are marked *