Huawei Y6 2019 MRD-LX1 Stock Firmware (Flash File)

Thank you for visiting The firmware file that SkyFileOS are going to provide is for Huawei Y6 2019 MRD-LX1 (Huawei Y6 2019 MRD-LX1 Stock Firmware (Flash File)) On this page, you will find the official link to download the firmware file.

Huawei Y6 2019 MRD-LX1 Stock Firmware (Flash File)

Device Specifications-Huawei Y6 2019

Huawei Y6 2019 released in 2018, March. Came out with Android 9.0 Pie, available storage on market with 32GB-microSD, up to 1 TB (dedicated slot), The device runs on MT6761 Helio A22 with CPU-Quad-core 2.0 GHz Cortex-A53, It has a single camera feature rear camera- 13MP and single selfie camera- 8MP, The display size is about 6.09’’ inches {720×1560 pixels}, The RAM of this device is 2GB RAM and with 3020 mAh battery that is non-removable.

Huawei Y6 2019 MRD-LX1 Stock Firmware (Flash File)
Huawei Y6 2019

What all benefits you may get by installing this Firmware

Android is one amongst the foremost customizable software system that is that the sole reason why the general public purchase android devices. Flash file of Huawei Y6 2019 MRD-LX1 can help you to Upgrade, Downgrade or re-install the Stock Firmware (OS) on your device. The Stock Firmware (OS additionally helps you to repair the Mobile device, if it’s facing any Software system Issue, Bootloop Issue, IMEI Issue or Dead Issue. Just in case your device is stuck or in an exceedingly brick state due to careless rooting or flashing ways, then putting in Stock firmware on Huawei Y6 2019 MRD-LX1 will save your device. Check the alternative advantage of Stock firmware given below.

Some good advantage of installing the stock firmware

  • Fix Bugs on your device
  • Stock to gain your guarantee back.
  • Upgrade and Downgrade Huawei Y6 2019 MRD-LX1
  • fix the lag on
  • Flashing Stock firmware, you’ll solve code issues.
  • Standardizes colours for a a lot of fluid and dynamic show, and optimizes tactile vibrations.
  • Simplifies settings and choices for easier operation

What All Requirements You Need To Flash

  • Must produce a backup of Your ROM storage and private information.
  • it will Erase all of your information embrace Personal info.
  • Make Sure Your Phone has a minimum of 40-50% Charge to stop accidental stop working.

Flashing Guide For Huawei Y6 2019 MRD-LX1

  1. First of all what you need to do is open the zip file and extract the dload folder on the USB driver/Pendrive.
  2. Then you must turn off your Huawei Y6 2019
  3. After turining Off your device connect the Pen-drive with the OTG cable
  4. Now press the 3 buttons at identical time.

Volume + Volume – Power button.
Note: you’ll be able to use SD card also, Extract zip in Phone Storage and Same method.

Optional Method:

  1. First Enter the service menu by dialing * # * # 2846579 # * # *
  2. Press option 4. software Upgrade
  3. Press option 1. Memory Card Upgrade


The Firmware file is only for the Huawei Y6, Don’t try this file on any other device, It should brick or harm your Huawei Y6 2019 MRD-LX1 we are going to not be liable for that, Get a complete backup of your all data also. Be careful once selecting the flash file to flash. For instance, you merely got to use a flash file designed for the precise model of your Huawei Y6 2019 MRD-LX1. Flashing firmware file might cause you to lose the assurance, temporarily or for good. you’re chargeable for the treatment inflicted on your smartphone device. It is continuously smart to keep the device stock firmware with you just in case one thing went wrong.

Important Suggestion:

If you face any problem by the given firmware you’ll be able to write in comments we are going to attempt best to mend as presently as we are able to.

  • Model: Huawei Y6 2019 MRD-LX1
  • File Name:
  • Build number: MRD-LX1_MT6761
  • Size: 2GB

Add a Comment

Your email address will not be published. Required fields are marked *