Samsung Galaxy Note 10 SM-N970F Stock Firmware Download

Thank you for visiting The firmware file that SkyFileOS are going to provide is for Samsung Galaxy Note 10 (Samsung Galaxy Note 10 SM-N970F Stock Firmware Download) On this page, you will find the official link to download the firmware file.

Samsung Galaxy Note 10 SM-N970F Stock Firmware Download

Device Specifications-Samsung Galaxy Note 10

Samsung Galaxy Note 10 in 2019, August. Came out with Android 9.0 (One UI), available storage on market with 256GB 8GB RAM, The device runs on Exynos 9825, It has a single camera Quad rear camera- 12MP and single selfie camera- 10MP, The display size is about 6.3’’ inches {1080×2280 pixels}, The RAM of this device is 8GB RAM and with 3500 mAh battery that is non-removable.

Samsung Galaxy Note 10 SM-N970F Stock Firmware Download
Samsung Galaxy Note 10

What all benefits you may get by installing this Firmware

Android is one amongst the foremost customizable software system that is that the sole reason why the general public purchase android devices. Flash file of Samsung Galaxy Note 10 can help you to Upgrade, Downgrade or re-install the Stock Firmware (OS) on your device. The Samsung Stock Firmware (OS additionally helps you to repair the Mobile device, if it’s facing any Software system Issue, Bootloop Issue, IMEI Issue or Dead Issue. Just in case your device is stuck or in an exceedingly brick state due to careless rooting or flashing ways, then putting in Stock firmware on Samsung Galaxy Note 10 will save your device. Check the alternative advantage of Stock firmware given below.

Some good advantage of installing the Note Plus Firmware

  • Fix Bugs on your device
  • Stock to gain your guarantee back.
  • Upgrade and Downgrade Samsung Galaxy Note 10
  • fix the lag on Note 10
  • Flashing Stock firmware, you’ll solve code issues.

Flashing Guide For Samsung Galaxy Note 10

  1. First, download the Samsung USB Driver for your device.
  2. After that download, Odin on your pc download link is given down below.
  3. Open the Odin file on your computer.
  4. Get the flash file for your Samsung Galaxy Note 10 from this website.
  5. Get your device into download mode to get…turned off your device, press and hold Volume Down key, Home Key and Power Key.
  6. Then click volume up button key to enter download mode
  7. After that connect your device to your PC.
  8. Right-click on Odin and click on ‘run as administrator’.
  9. Your device ought to be automatically recognized by Odin. At the lower-left of Odin interface, it ought to show a message that says “Added!” and within the meanwhile, you must see a blue box at the ID: COM section stating “COM:3”.
  10. Whether it’s “PDA” or “AP” depends on the version of Odin that you used. However md5 file goes to either “PDA” or “AP
  11. After adding the file, click “Start” to start the flashing method.
  12. Note: Don’t take away or treat your Samsung Galaxy Note 10 till finished or failed is showed on Odin.
  13. When the flashing process starts, it may take up to 5-15 minutes. So, don’t hesitate please wait.

Watch Video for more in detailed

Video Credit To- Shift Continue


The Firmware file is only for the Samsung Galaxy Note 10, Don’t try this file on any other device, It should brick or harm your Samsung Galaxy Note 10 we are going to not be liable for that, Get a complete backup of your all data also. Be careful once selecting the flash file to flash. For instance, you merely got to use a flash file designed for the precise model of your Note 10. Flashing firmware files might cause you to lose the assurance, temporarily or for good. you’re chargeable for the treatment inflicted on your smartphone device. It is continuously smart to keep the device stock firmware with you just in case one thing went wrong.

Important Suggestion:

If you face any problem by the given firmware you’ll be able to write in comments we are going to attempt best to mend as presently as we are able to.

  • Model: Samsung Galaxy Note 10
  • Android version: 9.0

Add a Comment

Your email address will not be published. Required fields are marked *