Huawei Mate 30 Pro (LIO-L29) Stock Firmware

Thank you for visiting SkyFileOS.com. The firmware file that SkyFileOS are going to provide is for Huawei Mate 30 Pro (Huawei Mate 30 Pro (LIO-L29) Stock Firmware) On this page, you will find the official link to download the firmware for Huawei Mate 30 Pro.

Huawei Mate 30 Pro (LIO-L29) Stock Firmware

Device Specifications-Huawei Mate 30 Pro

Huawei Mate 30 Pro in 2019, October. Came out with Android 10.0, available storage on market with 128GB 8GB RAM, 256GB 8GB RAM, 512GB 8GB RAM, The device runs on HiSilicon Kirin 990 It has a single camera Quad rear camera- 40MP and single selfie camera- 32MP, The display size is about 6.53’’ inches {1176×2400 pixels}, The RAM of this device is 8GB RAM and with 4500 mAh battery that is non-removable.

Huawei Mate 30 Pro (LIO-L29) Stock Firmware
Huawei Mate 30 Pro

What all benefits you may get by installing this Firmware

Android is one amongst the foremost customizable software system that is that the sole reason why the general public purchase android devices. Flash file of Huawei Mate 30 Pro can help you to Upgrade, Downgrade or re-install the Stock Firmware (OS) on your device. The Huawei Stock Firmware (OS additionally helps you to repair the Mobile device, if it’s facing any Software system Issue, Bootloop Issue, IMEI Issue or Dead Issue. Just in case your device is stuck or in an exceedingly brick state due to careless rooting or flashing ways, then putting in Stock firmware on Huawei Mate 30 Pro will save your device. Check the alternative advantage of Stock firmware given below.

Some good advantage of installing the Note Plus Firmware

  • Fix Bugs on your device
  • Stock to gain your guarantee back.
  • Upgrade and Downgrade Huawei Mate 30 Pro
  • fix the lag on Mate 30 Pro
  • Flashing Stock firmware, you’ll solve code issues.

Flashing Guide For Huawei Mate 30 Pro

  • You need USB OTG
  • The archive with firmware, downloaded from any link above (may contain dload folder with files- unlmt.cfg and update.zip or only update.zip)
  • Battery should be charged (at least 50%)
  1. You first have to copy the dload folder from the archive with the firmware to the root of the USB OTG (if the archive contains only the update.zip file – create the dload folder and copy the update.zip file and an empty file with the name unlmt.cfg into it);
  2. Then reboot the device;
  3. Oonce the reboot is done, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
  4. As soon as the process is over – remove the USB OTG and the device will reboot. Do not insert the USB OTG until the device reboots again, and then do not forget to remove the firmware files from it.

Watch Video for more in detailed


Video Credit To- Anonna Telecom

Warning:

The Firmware file is only for the Huawei Mate 30 Pro, Don’t try this file on any other device, It should brick or harm your Huawei Mate 30 Pro we are going to not be liable for that, Get a complete backup of your all data also. Be careful once selecting the flash file to flash. For instance, you merely got to use a flash file designed for the precise model of your Huawei Mate 30 Pro. Flashing firmware files might cause you to lose the assurance, temporarily or for good. you’re chargeable for the treatment inflicted on your smartphone device. It is continuously smart to keep the device stock firmware with you just in case one thing went wrong.

Important Suggestion:

If you face any problem by the given firmware you’ll be able to write in comments we are going to attempt best to mend as presently as we are able to.

  • Model: Huawei Mate 30 Pro
Huawei Mate 30 Pro

Add a Comment

Your email address will not be published. Required fields are marked *