Samsung Galaxy S6/Edge/Edge Plus Firmware Download

Thank you for visiting SkyFileOS.com. The firmware file that SkyFileOS are going to provide is for Samsung Galaxy S6 (Samsung Galaxy S6/Edge/Edge Plus Firmware Download) On this page, you will find the official link to download the firmware file.

Samsung Galaxy S6/Edge/Edge Plus Firmware Download

Samsung Galaxy S6/Edge/Edge Plus Firmware Download
Samsung Galaxy S6/Edge/Edge Plus

Flashing Guide For Samsung Galaxy S6/Edge/Edge Plus

  1. First, download the Samsung USB Driver for your device.
  2. After that download, Odin on your pc download link is given down below.
  3. Open the Odin file on your computer.
  4. Get your device into download mode to get…turned off your device, press and hold Volume Down key, Home Key and Power Key.
  5. Then click volume up button key to enter download mode
  6. After that connect your device to your PC.
  7. Right-click on Odin and click on ‘run as administrator’.
  8. Your device ought to be automatically recognized by Odin. At the lower-left of Odin interface, it ought to show a message that says “Added!” and within the meanwhile, you must see a blue box at the ID: COM section stating “COM:3”.
  9. Whether it’s “PDA” or “AP” depends on the version of Odin that you used. However md5 file goes to either “PDA” or “AP
  10. After adding the file, click “Start” to start the flashing method.
  11. Note: Don’t take away or treat your device till finished or failed is showed on Odin.
  12. When the flashing process starts, it may take up to 5-15 minutes. So, don’t hesitate please wait.

Warning:

Don’t try this file on any other device, It should brick or harm your Samsung Galaxy S6/Edge/Edge Plus we are going to not be liable for that, Get a complete backup of your all data also. Be careful once selecting the flash file to flash. For instance, you merely got to use a flash file designed for the precise model of your device

. Flashing firmware files might cause you to lose the assurance, temporarily or for good. you’re chargeable for the treatment inflicted on your smartphone device. It is continuously smart to keep the device stock firmware with you just in case one thing went wrong.

Important Suggestion:

If you face any problem by the given firmware you’ll be able to write in comments we are going to attempt best to mend as presently as we are able to.

(Samsung Galaxy S6) SM-G920F (Europe)

(Samsung Galaxy S6)G920I (LATAM, Singapore, India, Australia, New Zealand)

(Samsung Galaxy S6)G920A (AT&T); G920T (T-Mobile)

Binary 1

(Samsung Galaxy S6)G920S/K (Korea)

(Samsung Galaxy S6)G9200 (Hong Kong)

(Samsung Galaxy S6)G9208 (China)

(Samsung Galaxy S6)G9209 (China)

(Samsung Galaxy S6) AT&T G920T1

(Samsung Galaxy S6 edge)

G925F (Global)

Baseband-XSG G925FXXU6ESA1

(Samsung Galaxy S6 edge)

G925I (LATAM, India, Australia)

(Samsung Galaxy S6 edge)

G925A (AT&T)

(Samsung Galaxy S6 edge)

G925T (T-Mobile)

(Samsung Galaxy S6 edge)

G925S/K/L (Korea)

(Samsung Galaxy S6 edge)

G9250 (China, HK)

(Samsung Galaxy S6 edge+)

G928F (Europe)

(Samsung Galaxy S6 edge+)

G928G (India)

(Samsung Galaxy S6 edge+)

G928T (T-Mobile)

(Samsung Galaxy S6 edge+)

G928A (AT&T)

Binary-2

(Samsung Galaxy S6 edge+)

G928I (Australia, New Zealand, Singapore)

Add a Comment

Your email address will not be published. Required fields are marked *